* Introduction
4-Ports 10/100Mbps-TP
2-SFP Slots 100Mbps
IEEE 802.3af 15.4Watt PoE
2K MAC Address
Wide operating temperature : -40°C~70°C
DC 48V
* Specifications
| Technology | – standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3af Power over Ethernet Standards |
| Interface | – RJ45 Ports | 4-Ports 10/100Mbps, Auto MDI/MDI-X TP/STP Cat. 3, 4, 5, 6 Cable EIA/TIA-568 100-ohm(100m) Provides DC 48V Power over RJ-45 Ethernet cable to devices with Ethernet port |
| – Fiber Ports | 100Base-FX, 2-SFP Ports Multi mode: 62.5/125㎛(2km), Single mode: 9/125㎛(20km~100km) | |
| – LED Indicators | Per unit: Power, Fault TX Port (Link/Act, FDX/HDX, Speed) FX Port (Link/Act, FDX/HDX, Speed) External DIP : Auto-negotiation, 10/100Mbps, Full/Half Duples, Fault on/off | |
| Performance | – Data Transfer | 100Mbps |
| – MAC Address | 2K MAC address table | |
| Environmental | – Temperature | Operation: -40°C ~ 70°C, Store: -45°C ~ 85°C |
| – Humidity | 5% ~ 95% (Non-condensing) | |
| Power Supply | – Input Voltage | DC 48V |
| Mechanical | – Installation | DIN-Rail, Panel Mounting |
| – Dimensions | 55mm(W) x 120mm(D) x 150mm(H), 820g (Full-Package) |
* Features
4-Ports PoE 10/100Mbps-TX + 2-SFP Slots 100Mbps
– 4-Ports PoE 10/100Mbps TP
– 2-SFP Slots 100Mbps
– IEEE 802.3af 15.4Watt PoE
– 2K MAC Address
– Wide Operating Temperature : -40°C~70°C
– Support DIN-Rail
– Power polarity reverse protect
– Power : DC 48V(Terminal Block)
– Industrial 100Mbps Fiber Optic Switch
